Back to Blog
Commercial & Storefront July 15, 2026Updated November 16, 2026 3 min read

Fire-rated doors in BC for property managers

What to record when a fire door fails to close or latch, where to check the BC and Vancouver rules, and what to send before booking a repair.

A stairwell door that closes but fails to latch needs attention. Record the location, tell whoever manages fire safety for the building, and keep the exit route clear. If you manage a strata, office or commercial building in B.C., the checks below can help you describe what went wrong and get the right person to look at it.

Check the door and frame together

A fire-rated door protects an opening in a fire separation, such as the wall between a corridor and an enclosed stairwell. The opening includes the door, frame and hardware. If it has a vision panel, the glazing and its frame are part of the assembly too.

Photograph the certification labels on the door and frame if they are visible. The labels help identify what is installed. To confirm what the opening requires, check the approved plans or door schedule for the building and ask the local authority if the records are unclear. UL Solutions guide to door and frame markings

Find the rules for your building

The B.C. Building Code covers the design and construction of fire separations and their openings. The B.C. Fire Code covers fire safety in existing buildings and places under construction. The required protection can vary with the building and the location of the door, so use the approved plans before ordering a replacement. B.C. Building Code · B.C. Fire Code

For a property in the City of Vancouver, check the city’s Fire By-law and its guidance on fire and exit doors. The city covers closing and latching, clear exits, signs and permitted hold-open devices. If you manage a building elsewhere in Metro Vancouver, check with that municipality about the requirements for your site. City of Vancouver fire and exit door guidance

What to flag on a walkthrough

Look at the door during normal use and log what you see. Follow the building’s fire safety procedures if the door fails to operate or the exit is obstructed.

  • The door stops before it reaches the frame, rubs against it or swings shut without latching.
  • The closer leaks, a hinge is loose, or the frame or glazing is damaged.
  • A required sign is missing, or a certification label is painted over or unreadable.
  • A wedge, mat or stored item keeps the door open or obstructs the exit.

Keep wedges and props off fire doors. If the door has an approved automatic hold-open device and it appears faulty, report it through the building’s fire safety procedure. Use the building’s inspection schedule and confirm any questions about frequency or sign-off with the local fire authority.

What to send when you arrange a repair

Include the address, floor and door number, plus a short description of the fault. A photo of the whole opening and close-ups of the labels and damaged hardware help identify the assembly. Attach the door schedule or the relevant line from the inspection report if you have it.

Have a qualified door professional check compatibility with the listed assembly before replacing a closer, latch or other hardware, or altering the door or frame. If the opening needs an inspection or approval, ask the local fire authority who can provide it. Commercial door repair from GVA

Need help with your garage door?

Call 604.398.4009, book online, or get a free estimate.